About X25

About X25 Smart Version android OS firmware upgrade


X25 android projector support OTA online update Android firmware. Every time we update the firmware, after uploading to the cloud server, X25 Smart Version will prompt to update, Operation video guide: https://youtu.be/oVkqbT5DTa0


It can also be upgraded via U disk


Operation method 1:

1. You can click the icon below to download the firmware of X25 Android. Unzip files,  Do not change the name of the file, otherwise the projector will not recognize it.

2. Copy the firmware to the root directory of the U disk. Note: Do not put it in other folders. 

3. Turn on the projector and let the projector work normally.

4. Insert the U disk into the USB 1 port of the projector

5. Enter the file management, find the files in the U disk, and check whether the firmware has been copied to the U disk.

6. Operating the projector, enter "Settings" - "System Upgrade" - "Local Upgrade" in turn, Follow the prompts to upgrade

7. Wait for the projector to upgrade, do not power off or terminate the projector upgrade in the middle, otherwise the projector will not work.

Note: the upgrade process must not be interrupted.


Firmware upgrade operation guide video: https://youtu.be/s2zFdFoIdWk



Operation method 2:For users who cannot upgrade with the first method.

1. Place the downloaded compressed file into the root directory of the USB flash drive

2. Unzip the compressed file in the USB flash drive

3. Insert the USB flash drive into the projector and press and hold the power button until the update interface appears.

Note: the upgrade process must not be interrupted.


Firmware upgrade operation guide video: https://


X25 Smart Version Android firmware download 01
Firmware version: 2023_1221


About X25 Smart Version Wifi-display Function



With the development of science and technology, in the current Bluetooth function, it is no longer used for Bluetooth to transfer files. The role of Bluetooth is only to transmit sound. The Bluetooth file transfer function has been replaced by APP.

Wifi, Bluetooth, wifi-display (airplay, Miracast, DLNA) are all different functions. The effects are different.

 

   wifi-display function, the projector displays the image and sound of the mobile phone screen through the mirroring function of the smartphone. This is not achieved using the Bluetooth function. It is achieved through the screen mirroring function that comes with the phone.

 

1. ios smartphone realizes screen mirroring via projector’s “CoolAirMirror app

 

Operation instruction video connection: https://youtu.be/obQHujpqyUg

 

2. Android smartphones realize screen mirroring via projector’s “miracast app

 

Operation instruction video connection: https://youtu.be/Lg6kxSje-nY

 

Note: Not all Android smartphones support the screen mirroring function. For smartphones that support screen mirroring, there are options similar to this in the "Settings" or "More Functions" options of the smartphone, for example: "Screen mirroing", "Wifi-display", "multi-screen", "screen projection", "play to", "media output", etc.


If the projector's pre-installed screen mirroring app is not compatible with your Android smartphone, you can also download and install Airscreen, happycast and other apps that support wifi-display on the projector.


Tips:

Some video apps with copyright protection cannot support wireless projection from other devices to the projector. For example, Netflix, iTunes Movie, Google Movie, Amazon Prime do not support this function on some smartphone and computers. All Android system projectors on the market are the same.



X25 Projector Operation Guidance Video 



1. How to operate BYINTEK X25 manual focus and auto focus?


Operation instruction video connection: https://youtu.be/qpDkD-VUuOY

X25 Smart Version Projector Operation Guidance Video 



1. How to connect laptop Computer to BYINTEK X25 Smart projector?


Operation instruction video connection: https://


On the computer desktop, you can set 3 display modes

1. Duplicate mode: computer and projector display the same screen

2. Extended mode: The projector displays the extended screen of the computer

3. Display only monitor 1: Only display the laptop screen

4. Display only monitor 2: Only display the projector screen


2. How to use the BYITNEK X25 Smart Version projector (how to turn it on)?


Operation instruction video connection: https://youtu.be/blm3UbWcv4w


3. How to install a hanger for the BYINTEK X25 projector?


Operation instruction video connection: https://

4. How to check the system version information of BYINTEK X25 Android projector?


Operation instruction video connection: https://youtu.be/cPZvR00R-tQ


5. How to change the system language of BYINTEK X25 ?


Operation instruction video connection: https://youtu.be/ea26HinoPEQ


6. How to set the default signal source of BYINTEK X25  after booting, for example to HDMI by default?


Operation instruction video connection: https://youtu.be/2C2cSwQv0Ek


7. How to operate BYINTEK X25 to restore factory settings?


Operation instruction video connection: https://youtu.be/F6YhpM3xXYA


8. How to operate BYINTEK X25 image flip??


Operation instruction video connection: https://youtu.be/BF6rouxuz3E


9. How to operate BYINTEK X25 vertical and horizontal keystone correction?


Operation instruction video connection: https://youtu.be/G6tRp9gOTY8


10. How to operate BYINTEK X25 manual focus and auto focus?


Operation instruction video connection: https://youtu.be/qpDkD-VUuOY


11. How to operate X25 Android to upgrade via network OTA?


Operation instruction video connection: https://youtu.be/oVkqbT5DTa0


12. How to operate X25 Android to update firmware via U disk?


Operation instruction video connection: https://youtu.be/s2zFdFoIdWk


13. How to operate BYINTEK X25 IPhone wireless screen mirroring?


Operation instruction video connection: https://youtu.be/obQHujpqyUg


14. How to operate BYINTEK X25 Android wireless screen mirroring?


Operation instruction video connection: https://youtu.be/Lg6kxSje-nY


15. How to operate BYINTEK X25 iPhone wired screen mirroring?


       Operation instruction video connection: https://youtu.be/TAXos-0j1aM


16. How to connect a macbook computer to the projector via HDMI cable?


Operation instruction video connection: https://


17. How to operate BYINTEK X25 to turn on automatically?

Operation instruction video connection: https://youtu.be/SWoi3xA6UBU


18. How to control the projector to automatically play videos, pictures, advertisements

1. APK download link: https://we.tl/t-pMsCgqdnze

2. Download and install on the projector, APK name: look digital signage

3. Then link the projector and computer in the same network

4. After the projector installs this APK, open the APP device will prompt a code: similar to 875587

5. Log in to this website “https://app.lookit.hk/signin” on the computer, register the account to activate, enter the control page, enter the device code of the projector, and add the projector device

6. You can set the content you want to play through the computer in the background of this website.

7. Every time you start the projector, the projector will automatically play the set advertisement video or picture.

8. The K25 Smart Version projector can be set to start automatically when it is powered on. Operation steps: https://youtu.be/n1FTnxr-FN0



19. How to solve Fire TV stick 4K connected to the projector to play movies no sound?


Turn off Dolby in the setting sound of Fire TV stick 4K.

         Step:"setting"----"display&Sound"---"Audio"---"Dolby digital output"---"Dolby digital plus OFF", Turn off Dolby,Do it a few times,Confirm whether Dolby is successfully turned off.

         Tips: Some sources can work normally without turning off Dolby and setting them to automatic mode. If there is still no sound in automatic mode, you must turn off Dolby.

         Operation video guide:https://youtu.be/2S77xzLHC84



X25 Series Projector Maintenance Guide


1. How to solve the problem of remote control not working?

1.1 The projector comes standard with a 2.4G wireless remote control. If the remote control does not work, you need to re-operate the remote control to pair with the projector.

The operation method is to take out the battery of the remote control, start the projector, wait for the projector to turn on, then move the remote control close to the projector, and then install the battery of the remote control, and the remote control will re-pair with the projector.

1.2 One remote control can only correspond to one projector, and cannot be used for two K45s at the same time.

1.3 If the pairing is unsuccessful, replace a remote control and try again.

1.4 If the replacement of the remote control still fails, it may be that the cable between the remote control receiver and the motherboard is loose. Reconnect the cable between the receiver and the motherboard.

1.5 If there is still a problem, there may be a problem with the remote control receiving circuit board or the main board. Just replace the corresponding parts. There is a disassembly video guide below.


2. How to replace the dust filter of BYINTEK X25 series projector?

Fault phenomenon: If the projector has been used for a long time, the projector often shuts down automatically, or the projector screen slowly turns yellow, there may be too much dust on the filter screen. Remember to clean the dust on the filter screen regularly to ensure the normal heat dissipation of the projector.


Operation guide video URL: https://youtu.be/B4pjodXI_kc

3. Without disassembling the projector, how to clean the dust on the screen of BYINTEK X25 series projector?

Fault phenomenon: If there are movable dust particles or relatively large dust particles on the screen, you can turn on the projector, then turn the projector's lens down, slap the projector body, and let the fan take away the dust.

Operation guide video URL: https://youtu.be/1Jp2hkT3P6w


4. Disassemble the projector to clean up the dust on the LCD of BYINTEK X25 series projector


Fault phenomenon: If you find black dust-like dots on the projection screen, it means that there is dust or foreign matter on the LCD surface inside the projector, which needs to be disassembled and cleaned up.

Operation guide video URL: https://youtu.be/Nla6K9nzgYc


5. The lens of the BYINTEK X25 projector has no light coming out, and the LED does not work, how can I solve it?


Fault phenomenon: After the projector presses the power button, you can hear that the fan inside the projector is working normally, but there is no light coming out of the lens at all, maybe the LED is not working.

First, disassemble the projector to check whether the cables on the power board are connected properly. If the cables on the power board are connected normally and there is no looseness, the projector still does not work, and a new power board needs to be replaced. If it is still not normal, you need to replace the LED. If the lens still has no light after replacing the LED, you need to replace the motherboard.

Usually replace the power board projector is normal. LED damage is generally caused by high voltage breakdown of the projector's LED due to lightning strikes or unstable household power grids.


Operation guide video URLhttps://


6. Replace the power board of BYINTEK X25 series projector


Fault phenomenon: The power indicator on the top cover of the projector is not on, or there is no light coming out from the inside of the projector lens (that is, the LED does not work), it may be a problem with the power board, and the power board needs to be replaced


Operation guide video URL: https://youtu.be/HEQ1QKibFNU


7. Replace the focus motor of BYINTEK X25 series projector


Fault phenomenon: If you press and hold the "F+" and "F-" buttons of the remote control, the projector lens cannot move back and forth, that is, it cannot be focused. It may be that the focusing motor is not working, or the circuit board connected to the focusing motor is not working. Replace both parts.


Operation guide video URL: https://youtu.be/likKxUVXxgo


8. A few minutes after the projector is turned on, a black shadow appears in the middle of the screen and gradually expands. It may be that the filter is blocked, or the LCD cooling fan inside the projector is not working.

How to disassemble to check the dust filter and check whether the LCD cooling fan is working normally?


Operation guide video URLhttps://


9. Replace the cooling fan of BYINTEK X25 series projector


Operation guide video URL: https://youtu.be/wvhFFiPYdz4


10. Replace the motherboard of BYINTEK X25 series projector


Operation guide video URL: https://youtu.be/xIyK6emfX1M


     11. Check whether the LCD cable connection is normal, how to reconnect the BYINTEK X25's LCD cable?


Fault phenomenon: If the projector is transported by express, resulting in abnormal image display, streaks, white screen or black screen, it may be caused by loose LCD cable. Follow the video instructions at the URL below to reconnect the LCD cable. If the operation is still not normal, then the LCD should be replaced.

Operation guide video URL: https://


12. How to replace the LCD of the BYINTEK X25 projector? 


Fault phenomenon: If the picture image is abnormal, there are colored streaks, or there are cracks, black blocks that will not recover after the projector cools down, etc., the LCD may be damaged and the LCD needs to be replaced. 

Disassemble the projector, use the mobile phone to shoot the text on the LCD cable for your after-sales customer service, the customer service will send it to you according to the corresponding LCD arrangement, and the projector system firmware used for different LCDs is different. If a different LCD is replaced, it will cause the projected image to display abnormally. At this time, the customer service needs to send you the system firmware corresponding to the LCD you received, copy the program to the U disk and directory, and insert it into the USB of the projector. Then connect the projector to the power supply, wait for a few seconds, then press and hold the power button for 10 seconds, then release the button, let the projector update the program automatically, wait for 10 minutes, if the projector has an image, it means it is normal.


Operation guide video URL: https://youtu.be/Nla6K9nzgYc


13.  What should I do if the remote control does not respond? How to replace the 2.4G remote control receiver inside the BYITNEK X25 series projector?


Solution:

1. Turn on the projector first, then remove and re-install the batteries of the remote control.

2. If it still doesn't work, please replace the remote

3. If replacing the remote control does not work, please replace the remote control receiver inside the projector

Replacing the remote control receiver inside the projector, operation guide video URL https://


14. BYINTEK X25 series projector all parts disassembly instruction video (disassemble: motherboard, LCD, power board, fan, Insulation glass, reflector, lens, LED, focus motor, speaker, 


Operation guide video URL: https://